Decode a tire size such as P215/55R17 94V part by part, work out sidewall height from width and aspect ratio, and learn where to find the size your car needs.
How do you read tire size numbers?
A size such as P215/55R17 94V lists the vehicle type, tire width in millimeters, aspect ratio, construction, rim diameter in inches, load index and speed symbol, in that order. That breakdown comes from Honda’s 2027 HR-V owner’s manual, which also says to replace tires with the same size.
The size tells you how a tire is built, not how much air it needs. For pressure, use the placard versus sidewall guide. More wheel and tire topics are in Tires, Wheels and Brakes.
What each part of P215/55R17 94V means
Honda’s manual starts with the letter P, which it says means a passenger vehicle. NHTSA’s label guide also lists “P or LT” as a marking, so confirm any LT size in your own manual. The rest of the code reads like this.
| Part | What Honda’s manual says |
|---|---|
| 215 | Tire width in millimeters |
| 55 | Aspect ratio, the section height as a percentage of the width |
| R | Tire construction code, where R means radial |
| 17 | Rim diameter in inches |
| 94 | Load index, a numerical code tied to the maximum load the tire can carry |
| V | Speed symbol, a letter code for the maximum speed rating |
Federal rules back the idea of a width and a sidewall. 49 CFR 571.109 defines section width as the distance between the outside of the sidewalls of an inflated tire, not counting raised lettering. It defines the sidewall as the part of the tire between the tread and the bead.
Work out sidewall height from width and aspect ratio
NHTSA says the aspect ratio is the ratio of height to width. It adds that a number of 50 or lower means a short sidewall, which helps steering response and handling.
So the height is the width multiplied by the aspect ratio as a decimal.
- Change 55 to 0.55.
- Multiply by the width: 215 x 0.55 = 118.25 mm.
- Divide by 25.4 to get inches: 118.25 / 25.4 = about 4.66 in.
- For overall diameter, add two sidewalls to the rim: 17 + (2 x 4.66) = about 26.3 in.
Treat the result as a nominal figure. The standard measures width on an inflated tire, so a real tire can differ slightly.
| Size | Sidewall height (mm) | Sidewall height (in) |
|---|---|---|
| 195/65R15 | 126.75 | about 4.99 |
| 205/55R16 | 112.75 | about 4.44 |
| 215/55R17 | 118.25 | about 4.66 |
| 235/60R18 | 141.00 | about 5.55 |
| 225/45R17 | 101.25 | about 3.99 |
The last row has an aspect ratio under 50, so by NHTSA’s description it has a short sidewall.
Find the size your car needs
NHTSA says to check the Tire and Loading Information Label on the driver’s door edge or post, or the owner’s manual, for the correct size. It advises buying replacements in the same size as the original tires, or another size the vehicle maker recommends. If you are unsure, it says to ask a tire dealer.
Under 49 CFR 571.110, the placard shows the original tire size and the spare size. The maker may also print the load index and speed rating just to the right of the size. 49 CFR 571.139 requires the size designation to be marked on the tire sidewall.
The used car tire check includes this size match as one step. Wheel fit is a separate question; see what wheel offset means.
Load index and speed symbol: what the sources say
Honda describes the load index as a code associated with the maximum load the tire can carry, and the speed symbol as a code for the maximum speed rating. The sources used here do not publish a chart that converts each code to pounds or miles per hour. Use the tire maker’s data or a tire dealer for exact figures, and match or exceed the numbers your vehicle maker lists.
The maximum load rating and maximum inflation pressure are marked separately on the sidewall, under 49 CFR 571.139. Federal rule 571.110 also says the vehicle’s maximum load on a tire may not exceed the maximum load rating marked on that tire’s sidewall.
Sidewall numbers that are not part of the size
Some other markings sit near the size but mean something else:
- Treadwear, traction and temperature grades. 49 CFR 575.104 gives the example “Treadwear 200 Traction AA Temperature A”.
- The DOT tire identification number. NHTSA says its last four digits give the week and year of manufacture, so 0308 means the third week of 2008.
Frequently asked questions
What does the number after the slash mean?
It is the aspect ratio. Honda’s manual calls it the section height as a percentage of the width, so 55 means the sidewall is 55 percent as tall as the tire is wide.
What does the P at the start of a tire size mean?
Honda’s manual says P indicates a passenger vehicle. NHTSA lists “P or LT” among the sidewall labels, so a size that starts with LT should be checked against your manual or a tire dealer.
Where do I find the tire size my car came with?
Look at the Tire and Loading Information Label on the driver’s door edge or post, or in the owner’s manual. Federal rule 571.110 requires the placard to show the original tire size and the spare size.
Can I fit a different tire size?
NHTSA says to buy the same size as the original tires or another size the vehicle manufacturer recommends. If you have doubts about a different size, it advises asking a tire dealer.
