Decode a trailer tire's load figure, load range letter, speed marking and date code, and match the tires to the trailer axle rating with the federal arithmetic.
What does the load number on a trailer tire mean?
The number is the most weight the tire may carry, and it only applies at the cold inflation pressure printed beside it. A tire marked “Max load 2,040 lb at 65 psi cold” is not a 2,040 lb tire at 40 psi.
Federal rules set the wording. 49 CFR 571.119 requires each tire to be marked with “Max load ___kg (___lb) at ___kPa (___psi) cold”. It also requires the load range letter, a speed restriction if the tire is limited to 90 km/h (55 mph) or less, and the tire size.
That standard covers tires for special-use trailers, which it lists as ST, FI and tires with a rim diameter code of 12 or lower. 49 CFR 571.110 allows trailers to be fitted with ST or FI tires that meet 571.119. More towing basics are in Off Roading and Towing.
Load range letters and load index numbers
Trailer tires commonly use a load range letter, such as C, D or E. 571.119 requires the letter that designates the load range. The letter is not a weight by itself, and it is not the same as the numerical load index on a passenger tire.
A load index is a code tied to a maximum load, as the tire size guide explains. For a trailer, the useful number is the one printed with the inflation pressure, because that pairs a load with the pressure needed to carry it.
Do not compare a load range letter from one size or brand with another without the printed load figure. The same letter can appear on different sizes with different capacities.
The axle rating is the number the tires must support
The rule is an axle rule, not a tire rule. Under 571.110, the sum of the maximum load ratings of the tires fitted to an axle must be at least the axle’s GAWR. 571.120 repeats the requirement for vehicles over 10,000 lb GVWR.
So divide the axle rating by the number of tires on that axle.
| Trailer axle | Tires on the axle | Load needed per tire | What the arithmetic shows |
|---|---|---|---|
| 3,500 lb GAWR | 2 | 1,750 lb | 3,500 divided by 2 equals 1,750 |
| 7,000 lb GAWR | 4 | 1,750 lb | Two axles with two tires each |
| 5,200 lb GAWR | 2 | 2,600 lb | 5,200 divided by 2 equals 2,600 |
| 3,500 lb GAWR with passenger tires | 2 | 1,925 lb | 1,750 multiplied by 1.10 equals 1,925 |
The last row comes from 571.110. When passenger car tires are installed on a trailer, each tire’s load rating is divided by 1.10 before the axle sum is calculated. A 1,750 lb rating becomes about 1,591 lb, so the tire must start higher. Running the arithmetic the other way, 1,750 multiplied by 1.10 is 1,925 lb.
Use the tire’s rating at the trailer’s recommended pressure, not its highest possible rating. The rule asks whether the fitted tires support the axle rating, not whether a bigger tire could.
Read the trailer placard before the sidewall
A trailer must carry a placard with the recommended cold tire inflation pressure, the tire size and a cargo capacity statement. 571.110 requires the statement “The weight of cargo should never exceed” a stated figure. That placard pressure is the pressure at which the fitted tires support the axle rating.
The sidewall maximum is not a recommendation to inflate to that pressure. 571.120 says the recommended cold pressure for the tires must be one at which their load ratings suit the GAWR. Use the trailer maker’s figure, then confirm the tires match the size and load on the placard.
For a recreation vehicle trailer, 571.110 also says the sum of the axle ratings plus the recommended tongue weight must be at least the trailer’s GVWR. That keeps the trailer’s own weight budget consistent with its axles.
Check the date code and the speed marking
The DOT tire identification number ends with a four-symbol date code. Under 49 CFR 574.5, the first two symbols give the week and the last two the year, so 0109 means the first full week of 2009. The code tells you when the tire was made, not how much tread is left.
571.119 also requires a maximum speed marking on tires limited to 90 km/h (55 mph) or less. If a trailer tire carries that marking, the limit applies even on a highway with a higher posted limit.
A trailer tire also carries its maximum load only at the stated pressure. A tire run below that pressure carries less, which is why a pressure check belongs in the pre-trip routine. For tire size markings that sit beside the load figures, see how to read tire size numbers.
Frequently asked questions
Does a higher load range always mean a better tire?
No. It means the tire is rated to carry more at its stated pressure. The trailer needs a tire that meets or exceeds the axle requirement, in the correct size for the rim.
Can I use passenger tires on a trailer?
The rules allow it within limits, but the load rating is divided by 1.10 first. A passenger tire therefore needs more rating than its printed number suggests. Check the trailer placard and the tire maker’s data.
Should I inflate trailer tires to the sidewall maximum?
Use the pressure on the trailer placard, which is set for the axle load. The sidewall figure is a maximum, not a target for every load.
Where is the trailer’s cargo capacity printed?
On the trailer placard required by 571.110, in the statement “The weight of cargo should never exceed” a stated figure. It is separate from the tow vehicle’s payload label.
