Compare CCS1, NACS/J3400 and CHAdeMO EV connectors, what each supports, and when an adapter can bridge the difference safely.
Which connector will your car actually use?
CCS1 and CHAdeMO are DC fast-charging connectors, while NACS, now standardized as SAE J3400, carries both AC and DC charging. Your car’s inlet and the charger’s cable decide what fits, and an adapter only bridges approved combinations.
The names describe the plug, not the charging speed by themselves. A connector can appear on a slow AC charger or a high-power DC charger. What matters is the vehicle inlet, cable, station capability and any approved adapter.
The EV Charging hub covers charging levels and home equipment. This guide focuses on connector types and the compatibility questions they create. For the session itself, see how to use a public charging station.
CCS1: the connector built on J1772
CCS1 stands for Combined Charging System 1. The Joint Office of Energy and Transportation describes it as the SAE J1772 combo: the same five-pin layout used for AC Level 1 and Level 2 charging, plus two additional bottom pins for DC fast charging.
That layout explains why a CCS1 vehicle can use the same charge port for home AC charging and public DC fast charging. The AFDC notes that a CCS port accepts Level 1, Level 2 or DC fast charging equipment.
CCS1 is the connector most current US EVs use for DC fast charging. The Joint Office says most EV models on the market today charge using CCS1, although manufacturers have been shifting toward J3400. Federal rules reinforce that role: 23 CFR 680 requires each federally funded DC fast-charging port to charge any CCS1-compliant vehicle and to have a permanently attached CCS1 connector. A J3400 connector is allowed if the port also has a CCS1 connector that meets the rule.
CHAdeMO: a separate DC standard
CHAdeMO is the third DC fast-charging connector type identified by the AFDC, alongside CCS and J3400. The AFDC describes it as another common DC fast connector type among Japanese automakers. A vehicle with a CHAdeMO inlet needs a station with that connector, or an approved adapter where one exists.
The AFDC says Tesla vehicles do not have a CCS or CHAdeMO charge port, but come with a limited CCS or CHAdeMO adapter that supports charging up to 19.2 kW. Tesla sells full-power adapters for both connector types. That power limit is a good reminder that an adapter is not always a free upgrade.
J3400/NACS: one connector for AC and DC
NACS began as Tesla’s connector and was renamed the North American Charging Standard. SAE International then began standardizing it as J3400.
The Joint Office explains that the NACS connector works for AC Level 1 and Level 2 charging as well as DC charging, using the same pins for both power paths. It also says NACS is compatible with the J1772 connector for AC charging through an adapter.
SAE published a J3400 Technical Information Report in December 2023 and established a Recommended Practice in August 2024. The Joint Office says most vehicle manufacturers committed to incorporate the connector beginning in 2025.
J3400 is also built for high power. The Joint Office’s adapter compatibility page says the connector is rated to support DC supply up to 1,000 volts and current up to 1,000 amperes with adequate cooling. That is a connector rating, not a promise for a given car or charger.
The EPA adds that some newer vehicles began using the J3400/NACS connector starting with model year 2025. Older CCS vehicles can use J3400 chargers only through an approved adapter.
| Connector | AC or DC | Key layout | Where you meet it |
|---|---|---|---|
| J1772 | AC Level 1 and 2 | Five-pin AC connector | Home and workplace Level 2 charging |
| CCS1 | DC fast charging | J1772 five-pin layout plus two DC pins | Most current EVs at public DC chargers |
| CHAdeMO | DC fast charging | Separate DC connector design | Some Japanese-brand EVs |
| J3400/NACS | AC and DC | Same pins for both power paths | Tesla and a growing share of newer EVs |
What an adapter can and cannot do
The Joint Office defines an adapter as hardware that lets an EV connect to a charger it otherwise could not connect to directly. Adapters can be portable or attached to the station. Tesla’s Magic Dock is an example of an attached NACS-to-CCS1 connector that lets a non-Tesla driver plug in at a Supercharger.
Adapters are not automatically interchangeable. The Joint Office says not all adapters work for all models of vehicles or chargers. It advised customers to use only adapters provided by their vehicle manufacturer for their specific vehicle and to follow the instructions.
Use the adapter the automaker approves for your model and the station type. An adapter changes the physical and electrical connection. It does not change the vehicle’s onboard charger limit or the station’s available power.
For more on approved use and failure modes, see the guide to EV charging adapters, safety and compatibility.
Frequently asked questions
Is NACS the same as CCS?
No. NACS is the Tesla-developed connector now standardized as SAE J3400, and it carries both AC and DC charging. CCS1 is the SAE J1772 combo connector, which adds two DC pins to the J1772 AC layout.
Can a CCS car use a Tesla Supercharger?
Only where the station and network support non-Tesla vehicles and the correct adapter is used. The Joint Office cites Tesla’s Magic Dock as an attached NACS-to-CCS1 solution. A physical fit alone does not guarantee access.
Do all EVs support CHAdeMO?
No. CHAdeMO is one of three DC fast-charging connector types in the United States, and the AFDC associates it with Japanese automakers. A car needs the matching inlet or an approved adapter.
Does an adapter increase charging speed?
No. An adapter changes the connection between the car and the charger. The vehicle and station still set the power, and some adapters carry their own limit. The AFDC notes that Tesla’s included CCS or CHAdeMO adapter supports up to 19.2 kW, while full-power versions are sold separately.
