THE MOTOR ATLAS GUIDE

How to Use a Torque Wrench Correctly

Take the torque value from your car's manual, pull the click-type wrench smoothly until it clicks, and follow the maker's re-check advice for lug nuts.

A wheel with five lug nuts joined by a star tightening pattern, a dial torque wrench below it and a card with a star diagram and a check mark.

Learn what torque is, how a click-type torque wrench works, where to find your car's specified value and how manuals say to tighten and re-check lug nuts.

Quick answer: Take the torque value from your car's manual, pull the click-type wrench smoothly until it clicks, and follow the maker's re-check advice for lug nuts.

What does a torque wrench actually do?

A torque wrench tightens a nut or bolt to one specific amount of twisting force, and that amount must come from your car’s manual, never from memory or a guess. An FAA safety course for aircraft mechanics defines torque as a turning or twisting force. It says torque differs from tension, which comes from a straight pull. The tool principles carry over to cars, but follow your own wrench’s instructions.

The same FAA course explains why the number matters. Tightening a nut turns force into tension in the bolt, which clamps the parts together. If tension is too low, the nut could vibrate or work loose. If it is too high, the bolt could break. This guide gives no torque value, because values differ by vehicle and part.

How a click-type wrench works

The FAA course lists four wrench types: beam, clicker, dial indicator and electronic. A clicker wrench is preset to a chosen torque. It releases automatically when that setting is reached, and the release usually comes with an audible click or a visible signal. When you feel or hear it, stop pulling.

The course adds rules for use:

  • Apply a smooth, even pull.
  • Never set the wrench above or below the values on its scale.
  • Never exceed the tool’s rated torque.
  • Never use it to break fasteners loose.

Finding the value for your car

Use the manual for your exact model year. The 2026 Kia K5 manual gives the wheel nut tightening torque in its changing tires steps, in two unit systems. It repeats the value in its tire rotation section. A 2025 Hyundai manual (CN7 edition) also lists the value in its changing tires steps.

Do not copy a number from another car. If your manual does not list a fastener, look in the maker’s service information. Our guide to finding accurate repair instructions shows where it lives.

The FAA course also notes that some bolts are tightened to a stretched length instead of a torque value. Follow the procedure the maker gives for that part.

Tightening lug nuts step by step

These steps combine the Kia and Hyundai manuals. Where your manual differs, follow your manual.

  1. Clean the mating surfaces. Kia says to remove corrosion, dirt and foreign material from the wheel and from the hub, drum or disc it touches. Poor contact can let nuts loosen and the wheel come off.
  2. Reuse the same nuts, or nuts with the same metric thread and shape. Both manuals warn about thread type.
  3. Keep studs and nuts free of oil and grease. Kia says never to use them because the nuts might come loose.
  4. Tighten the nuts by hand, check the wheel is fully seated, then tighten by hand again.
  5. Lower the car to the ground before final tightening.
  6. Follow the numbered order shown in your manual’s illustration. Both manuals show a diagram and neither names a pattern in words. Then double-check each nut.
  7. Set the wrench to the manual’s value and pull smoothly until it clicks.

When the manuals say to re-check

No single re-check rule fits every car. Here is what two manuals say.

Manual Follow-up it states
Kia 2026 K5, changing tires Have a dealer tighten the nuts to proper torque as soon as possible after changing wheels
Kia 2026 K5, tire rotation After rotation, check lug nut tightness at the proper torque
Kia 2026 K5, owner maintenance Check for loose wheel lug nuts at least monthly
Hyundai 2025 (CN7 edition) Dealer tightening soon after a change; re-check after 30 miles if tires were replaced and again after 620 miles

If your manual gives no interval, ask the dealer or tire shop what the maker advises. Do not invent your own schedule.

Caring for a torque wrench

The FAA course says to treat the wrench as a precision tool:

  • Do not use one with a missing or expired calibration certificate.
  • Clean it and store it in its case at the lowest setting.
  • Handle it with care, because dropping it loses calibration.
  • Never take it apart. Repair and recalibration belong to an accredited lab.
  • If you buy one used, calibrate it before first use.

Hyundai adds a limit for wheel work. If the jack, lug nuts or studs are damaged, do not change the tire and call for help. Kia warns that damaged studs may lose their ability to retain the wheel. Pair this guide with basic car repair tools for beginners, and browse DIY Car Repair or Tires, Wheels and Brakes for more.

Frequently asked questions

Can I use a torque wrench to loosen stuck nuts?

No. The FAA course says never to use a torque wrench to break fasteners loose. Keep the torque wrench for final tightening only, and use the tool your manual names for loosening.

Should I lubricate lug studs or nuts before tightening?

Not unless your manual says so. Kia says never to use oil or grease on wheel bolts or nuts. The FAA course says threads should be clean and dry unless the manufacturer says otherwise.

How should I store a click-type torque wrench?

Clean it and keep it in its case at the lowest torque setting, as the FAA course advises. Avoid drops, since a fall can throw off its calibration. Check the calibration certificate that came with it.

Can I add a pipe to the handle for extra leverage?

No. The FAA course says not to use a cheater bar or any handle extension. Kia also says not to put an extension pipe over its wheel wrench handle.

How this guide was prepared: Researched explanatory guidance using the sources linked on this page. We have not road-tested a vehicle or completed a hands-on inspection for this article. The displayed byline is a fictional editorial persona, not a real individual author or certified technician reviewer. Motor Atlas is responsible for this content. Confirm vehicle-specific procedures with the manufacturer, and ask an appropriate professional before safety-critical repairs, legal filings or financial decisions.

Related reading