THE MOTOR ATLAS GUIDE

How to Calculate Your Actual Gas Mileage

Fill the tank completely twice, divide miles driven by gallons added at the second fill-up, and average several tanks before judging the result.

Fuel pump, trip meter and a calculator grid for working out real gas mileage

Use the fill-to-fill method to measure your own mpg, with a worked example, the errors that spoil the result and reasons your number differs from the label.

Quick answer: Fill the tank completely twice, divide miles driven by gallons added at the second fill-up, and average several tanks before judging the result.

How do you calculate your actual gas mileage?

Fill the tank completely, record the odometer, then fill it completely again and divide the miles driven by the gallons added at the second fill-up. The result is your actual mpg for that tank.

This is the fill-to-fill method. fueleconomy.gov sets it out in four steps and gives a worked example with both the main odometer and the trip odometer.

The four-step odometer method

  1. Fill the tank completely. Write down the odometer reading.
  2. Drive normally. At the next fill-up, fill the tank completely again. Write down the new odometer reading and the gallons added.
  3. Subtract the first reading from the second to get the distance driven.
  4. Divide the distance by the gallons added. The answer is mpg for that period.

Do not use the fuel gauge for the gallons figure. Use the number on the pump. The gauge shows a rough level, not the volume burned.

A worked example with labelled numbers

The figures below are the example published by fueleconomy.gov. They are illustrative, not a test of any particular car.

Item Value How it is obtained
Odometer at first complete fill 32,645.1 miles Written down at the pump
Odometer at second complete fill 33,001.3 miles Written down at the pump
Distance driven 356.2 miles 33,001.3 minus 32,645.1
Gallons added at second fill 13.5 gallons Read from the pump
Fuel economy for the period 26.4 mpg 356.2 divided by 13.5

The trip odometer version is shorter. Reset the trip meter at a complete fill, then divide the trip distance by the gallons added at the next complete fill. EPA’s example is 335 miles divided by 9.5 gallons, which gives 35.5 mpg.

Why both fill-ups must be complete

MPG means miles per gallon used, so the gallons figure has to account for everything burned since the first reading. A partial fill does not do that. If you add 5 gallons to a tank that was already half full, those 5 gallons are not the fuel used over the distance.

fueleconomy.gov’s My MPG help warns that a partial fill makes the estimate inaccurate. Its calculation is valid only when the tank was filled completely at both the current and the previous purchase.

One tank is also a small sample. A long highway trip or a week of short errands can move the result by a lot. Track several complete fill-ups to get a better average and to see how much the figure fluctuates.

Why your number differs from the window sticker

The label figure comes from laboratory cycles, not from the road. How the EPA tests fuel economy explains the procedure. On the road, the factors EPA lists can move the result a long way.

fueleconomy.gov’s factor page gives ranges. Aggressive driving can lower mpg by about 15% to 30% at highway speeds and 10% to 40% in stop-and-go traffic. Maximum air conditioning can take 5% to 25%. Gasoline with 10% ethanol takes 3% to 4%. Cold weather and short trips hurt economy because the engine takes longer to warm up. A new engine may need 3,000 to 5,000 miles before it reaches its best figure.

Your trip mix matters too. The combined label rating weights city driving at 55% and highway driving at 45%, according to the label guide. A commute that is almost all highway will not match that mix. Use the rating to compare cars and your own log to judge your car.

Keep a simple fuel log

Record the date, odometer, gallons and price at every complete fill. Add the driving mix if you want to compare weeks. A notebook or a spreadsheet is enough. EPA’s My MPG tool accepts the same records and calculates the average for you.

The annual fuel cost on the window sticker assumes 15,000 miles and a projected gasoline price. It will not match your own spending. Your log will.

For a metric comparison, see L per 100 km vs MPG conversion. More context on fuel and efficiency is in the Fuel and Efficiency hub.

Frequently asked questions

Should I use the main odometer or the trip odometer?

Either works. The main odometer needs two readings and a subtraction. The trip odometer needs a reset at the first complete fill and one reading at the second.

Can I calculate mpg after one fill-up?

No. You need two complete fill-ups, because the method needs a distance and the fuel used over that distance. A single fill gives you neither.

Why is my calculated mpg different from the label every month?

The label is a laboratory estimate. Weather, traffic, speed, air conditioning, load and tire pressure change from tank to tank, so a monthly figure naturally moves around the annual rating.

How do I convert my result to liters per 100 km?

Divide 235.215 by your mpg figure. The conversion and worked examples are in L per 100 km vs MPG conversion. NIST gives the factor for US gallons.

How this guide was prepared: Researched explanatory guidance using the sources linked on this page. We have not road-tested a vehicle or completed a hands-on inspection for this article. The displayed byline is a fictional editorial persona, not a real individual author or certified technician reviewer. Motor Atlas is responsible for this content. Confirm vehicle-specific procedures with the manufacturer, and ask an appropriate professional before safety-critical repairs, legal filings or financial decisions.

Related reading