City mpg is usually lower because the city test stops, idles and starts cold. See why the highway cycle scores better and when hybrids reverse the gap.
Why is city mpg lower than highway mpg?
For most gasoline cars, city mpg is lower because the city test is stop-and-go, includes idling and starts cold, while the highway test is a steady warm cruise with no stops. The gap is a property of the driving, not a penalty added by the label.
The two numbers come from different speed traces. The city cycle covers 11 miles in 31.2 minutes at an average of 21.2 mph, with 23 stops and idling for 18% of the time. The highway cycle covers 10.3 miles in 12.75 minutes at an average of 48.3 mph, with no stops and a warmed-up engine. fueleconomy.gov
Where the fuel goes in each cycle
A moving car carries kinetic energy. Every stop turns that energy into heat at the brakes unless the car can recover it. Then the next acceleration has to build the energy again. City driving repeats that cycle many times. Highway driving holds a steady speed, so it avoids most of that loss.
Idling is the other city cost. The engine burns fuel while the car covers no distance. EPA’s energy diagram notes that city driving includes significant idling, while the highway cycle includes little or none. fueleconomy.gov
| Driving condition | What it does to fuel use | Where it is common |
|---|---|---|
| Idling | Burns fuel at 0 mpg | City traffic, drive-throughs, long warm-ups |
| Repeated braking | Discards kinetic energy as heat | Stop-and-go traffic |
| Cold start | Richer mixture and slower warm-up | First minutes of a trip |
| Steady cruising | Avoids stop-start losses | Freeway driving |
| High speed | Raises aerodynamic drag | Highway driving above moderate speeds |
The table explains the usual direction. It does not make highway driving automatically efficient. Speed still matters, and driving faster reduces mpg once aerodynamic drag takes over.
Why the highway number is not always the higher one
A hybrid can reverse the pattern. Regenerative braking recovers some energy that a conventional car loses at the brakes, and automatic stop-start shuts the engine off at a stop. Some hybrids can move at low speed on the electric motor alone, where a gasoline engine is least efficient. fueleconomy.gov
That is why a hybrid’s city rating can exceed its highway rating. A plug-in hybrid can go further: for short trips, EPA notes that some can use no gasoline at all. The rating then depends on how much of the trip is electric. fueleconomy.gov
The pattern also changes with temperature and driving style. Aggressive driving can cut mpg by roughly 15% to 30% at highway speeds and 10% to 40% in stop-and-go traffic, according to EPA’s factor list. fueleconomy.gov A heavy foot can erase the highway advantage.
What the combined number assumes
The label’s combined mpg is not a simple average. EPA weights the city value at 55% and the highway value at 45%. fueleconomy.gov That is an assumption about typical driving, not a measurement of your week.
Use the number that matches your pattern. A driver who spends the day in stop-and-go traffic should look at the city figure. A commuter who spends most of the trip on a freeway should look at the highway figure. For a mixed week, the combined value is the reasonable starting point.
The label also folds in adjustments from the high-speed, air-conditioning and cold-temperature tests. Those tests exist because the two basic cycles do not capture every condition. The EPA test guide explains how the five cycles become the sticker numbers.
Why your own result can beat or miss both
The test is run in a laboratory on a dynamometer. fueleconomy.gov It does not include wind, hills, roof cargo or the exact traffic you meet. It assumes a moderate temperature. Your result can differ from both ratings.
Measure your own figure from fill-ups rather than trusting one trip. How to calculate your actual gas mileage shows the method. Compare like trips: a tank of short errands and a tank of freeway miles are two different tests.
If you are comparing two cars, compare city with city and highway with highway. Do not set one car’s city number against another car’s highway number. The Fuel and Efficiency hub has the related guides.
Frequently asked questions
Why is city mpg lower than highway mpg?
The city cycle has more stops, more idling and a cold start. Each stop wastes kinetic energy, and idling burns fuel while the car is not moving. The highway cycle avoids both.
Is highway mpg always higher?
No. Hybrids can do better in the city because regenerative braking recovers energy and the engine can shut off at stops. Electric cars also recover braking energy, so the usual gasoline pattern does not carry over.
Which number should I use for my commute?
Use the one that matches your driving. Choose city for mostly stop-and-go trips, highway for mostly freeway trips, and combined for a mix close to EPA’s 55/45 assumption.
Why does the combined rating weight city driving more?
EPA weights city at 55% and highway at 45% to reflect typical driving. It is a fixed assumption for labeling, not a prediction of your own split.
