Read the EPA window sticker section by section: fuel economy, smog and greenhouse gas ratings, tailpipe CO2 and the assumptions behind each number.
What does an EPA vehicle emissions label show?
The EPA label is a window sticker that reports fuel economy, estimated fuel cost, tailpipe carbon dioxide, a greenhouse gas rating and a separate smog rating. It is not one combined environmental score.
The current design dates from a 2012 overhaul by EPA and the National Highway Traffic Safety Administration.
Reading it well means knowing which question each block answers. A low fuel cost does not always mean low smog. A strong greenhouse gas rating does not include fuel production.
The blocks on the sticker
| Label block | What it reports | Question it answers |
|---|---|---|
| Fuel economy | City, highway and combined mpg | How far does it go per gallon? |
| Fuel consumption | Gallons per 100 miles | How much fuel does a fixed trip use? |
| Annual fuel cost | Dollars, based on 15,000 miles | What might fuel cost in a year? |
| Five-year cost | Difference from the average new vehicle | How does it compare with a typical car? |
| Greenhouse gas rating | 1 to 10, based on tailpipe CO2 | How much carbon dioxide per mile? |
| Smog rating | 1 to 10, based on federal standards | How much smog-forming pollution? |
The label guide explains each area in turn. The combined mpg figure is a weighted average: 55% city and 45% highway.
The fuel consumption line is easy to skip, but it is the honest one for cost. Going from 10 mpg to 15 mpg saves about 33 gallons over 1,000 miles. Going from 30 mpg to 35 mpg saves about 5 gallons over the same distance. The first jump saves far more fuel.
Why smog and greenhouse gas ratings differ
The greenhouse gas rating reflects carbon dioxide from the tailpipe. EPA says CO2 makes up roughly 99% of the greenhouse gases emitted from a car’s tailpipe (EPA).
The smog rating covers a different set of pollutants. It reflects federal limits for nitrogen oxides, non-methane organic gases, carbon monoxide, particulate matter and formaldehyde. These are the pollutants that help form smog and can harm the lungs.
For a gasoline car, the fuel economy and greenhouse gas ratings are the same. Burning more gasoline means emitting more CO2. That direct link does not apply to the smog rating.
Electric and hydrogen fuel cell vehicles have no tailpipe emissions. Their smog rating therefore reflects zero tailpipe pollution. It does not describe the emissions from making the electricity or hydrogen.
How the smog rating is built
Automakers certify each model to a federal emissions bin. Each bin sets a ceiling for pollutants in grams per mile. Lower bins are cleaner.
The current Tier 3 standards include these limits (EPA):
| Tier 3 bin | NOx + NMOG (g/mi) | CO (g/mi) | PM (g/mi) |
|---|---|---|---|
| Bin 1 | 0 | 0 | 0 |
| Bin 20 | 0.02 | 1 | 0.003 |
| Bin 50 | 0.05 | 1.7 | 0.003 |
| Bin 125 | 0.125 | 2.1 | 0.003 |
| Bin 160 | 0.16 | 4.2 | 0.003 |
Every bin also caps formaldehyde at 0.004 grams per mile, except Bin 1 at zero.
The label turns the certified result into a 1 to 10 scale. Ten is best.
The rating describes the vehicle, not the place where it is driven.
What the cost and CO2 numbers assume
The annual fuel cost assumes 15,000 miles of driving and a projected gasoline price. The five-year comparison uses the same mileage and compares the car with the average new vehicle.
Tailpipe CO2 is shown in grams per mile. EPA uses 8,887 grams of CO2 per gallon of gasoline and about 400 grams per mile for the average passenger vehicle (EPA).
Those figures let you check a label with your own driving. Multiply your annual miles by the label’s grams per mile, then divide by 1,000,000 for metric tons. A car at 400 grams per mile and 12,000 miles a year works out to 4.8 metric tons.
The label’s fine print says real results vary with driving style, maintenance, air conditioning, weather, road conditions and load. The test is a standardized comparison, not a prediction of your commute.
What the label leaves out
The greenhouse gas rating covers tailpipe CO2 only. It does not include emissions from extracting, refining and transporting gasoline. EPA states this limitation on the label guide itself.
For electric and plug-in hybrid cars, EPA offers a separate calculator for electricity-related emissions. The result depends on the regional grid.
The sticker also does not score manufacturing or battery production, which create emissions before the first mile. That belongs to a lifecycle comparison, not this label.
Use the label to compare new vehicles on the same regulated measures. Use it with the federal emissions rules for aftermarket parts when modification questions arise. For state testing, check the state emissions requirement guide.
The wider Fuel and Efficiency section covers related ownership questions.
Frequently asked questions
Does a higher smog rating mean lower fuel costs?
Not necessarily. The smog rating measures tailpipe pollutants such as nitrogen oxides and particulate matter. Fuel cost depends on gallons burned, which the fuel economy and consumption figures show.
Why do gasoline cars show the same fuel economy and greenhouse gas rating?
For gasoline, CO2 output rises with the amount of fuel burned. EPA therefore uses the same 1 to 10 result for both scores. The smog rating stays separate because those pollutants are controlled by different equipment and standards.
Is the annual fuel cost the amount I will actually pay?
No. It is an estimate based on 15,000 miles a year and a projected national fuel price. Your mileage, local price and driving style can move the real cost up or down.
How is the smog rating set for an electric car?
The vehicle has no tailpipe smog-forming emissions, so its tailpipe measure is zero. The label does not count pollution from generating the electricity. A lifecycle view can look different.
