Learn how renewable diesel and biodiesel differ in chemistry, feedstocks, standards, blending and vehicle approval, and which one fits your diesel.
Is renewable diesel the same as biodiesel?
No. Biodiesel is a mono-alkyl ester made by transesterification and certified to ASTM D6751, while renewable diesel is a hydrocarbon made mainly by hydrotreating and certified to ASTM D975. The DOE Alternative Fuels Data Center states plainly that the two are not the same fuel.
They can come from similar feedstocks and both serve diesel engines. The differences show up in chemistry, blending limits, storage and what an engine maker approves.
The chemical difference
Biodiesel is produced by transesterification of vegetable oils and animal fats. In its unblended form it is called B100, pure or neat biodiesel. Its physical properties are similar to petroleum diesel, and it is used in compression-ignition engines.
Renewable diesel is processed to be chemically the same as petroleum diesel. It meets the ASTM D975 specification for petroleum diesel in the United States and the EN 15940 standard for paraffinic diesel fuels in Europe, according to DOE’s renewable diesel page.
The U.S. Energy Information Administration puts it simply: renewable diesel is chemically equivalent to petroleum diesel and can be used as a drop-in fuel.
Feedstocks and production
Biodiesel’s main U.S. feedstock is soybean oil. Animal fats from meat processing, used cooking oil and yellow grease from restaurants are also major sources. Rapeseed, sunflower and palm oil dominate in other countries.
Renewable diesel uses fats, oils and greases, including soybean oil and canola oil. Commercial plants use hydrotreating, which reacts the feedstock with hydrogen under elevated temperature and pressure in the presence of a catalyst.
DOE lists other possible pathways: gasification, pyrolysis, hydrothermal processing, biological sugar upgrading and catalytic conversion of sugars. Most commercial output today comes from hydrotreating, and some plants are converted petroleum refineries.
Side-by-side comparison
| Feature | Biodiesel | Renewable diesel |
|---|---|---|
| Chemical type | Mono-alkyl ester | Hydrocarbon |
| Main production route | Transesterification | Hydrotreating, with other pathways possible |
| Fuel standard | ASTM D6751 | ASTM D975; EN 15940 in Europe |
| Blending | Approved for blending with petroleum diesel | Drop-in replacement or blend at any ratio |
| Infrastructure | Blended and distributed as a diesel component | Can travel in petroleum pipelines and be sold at retail |
| Vehicle approval | All OEMs approve B5; check the warranty for B20 and higher | Check the manufacturer’s approval and fuel specification |
What the blend means at the pump
B20 is the most common biodiesel blend, containing 6% to 20% biodiesel mixed with petroleum diesel. B5, which is 5% biodiesel, is also common in fleets.
B20 and lower blends can be used in many diesel vehicles without engine modification, DOE says. All original equipment manufacturers approve B5, but higher blends depend on the engine warranty. That is the first thing to check before using B20 or B100.
Biodiesel raises the cetane number and improves fuel lubricity. DOE notes that lubricity can improve at blend levels as low as 1%, and that 2% biodiesel is almost always enough to meet the diesel lubricity requirement.
Cold weather behavior depends on the blend, the feedstock and the petroleum diesel. In general, lower biodiesel percentages perform better in cold temperatures, and B5 behaves much like No. 2 diesel.
Emissions and policy
Pure biofuels generally produce fewer particulates, sulfur dioxide and air toxics than fossil fuels when burned, according to EIA. Biofuel-petroleum blends also generally produce lower emissions than fuel without biofuel. Burning biodiesel may slightly raise nitrogen oxide emissions compared with petroleum diesel.
EIA also notes that carbon dioxide from burning biofuels is not counted in national greenhouse gas totals by international convention, because growing the feedstock may offset it. The actual net effect depends on production, including the heat source used at the plant.
Biodiesel meets both the biomass-based diesel and the overall advanced biofuel requirements of the Renewable Fuel Standard. The EPA runs that program, which requires lifecycle greenhouse gas reductions and tracks fuel pathways.
What to check before you fuel
Read the pump label and the owner’s manual. Confirm the maximum blend the manufacturer approves, especially if the vehicle is under warranty. Ask the fuel supplier for the blend and the specification it meets.
For renewable diesel, nearly all domestically produced and imported supply goes to California because of incentives under the Low Carbon Fuel Standard, DOE reports. Availability elsewhere may be limited even though the fuel is a drop-in replacement.
See how these fuels fit the wider picture in alternative fuels versus electric vehicles and why vehicle emissions rules change. More fuel topics sit under Fuel and Efficiency.
Frequently asked questions
Can I use renewable diesel in any diesel car?
Renewable diesel meets the petroleum diesel standard, but that does not replace the manufacturer’s approval. Check the owner’s manual and warranty, and confirm the fuel meets the specification the engine requires.
What does B20 mean?
B20 is a blend of 6% to 20% biodiesel with petroleum diesel. It is the most common biodiesel blend in the United States. Many diesel vehicles can use it without modification, but warranty terms vary by manufacturer.
Does biodiesel improve fuel lubricity?
Yes. Biodiesel improves lubricity even at low blend levels, and DOE says 2% biodiesel is almost always enough to meet the diesel lubricity requirement. It also raises the fuel’s cetane number.
Why is renewable diesel common in California?
DOE says nearly all domestically produced and imported renewable diesel is used in California because of economic benefits under the state’s Low Carbon Fuel Standard. That policy, not nationwide availability, explains the concentration.
