THE MOTOR ATLAS GUIDE

How to Find a Blown Car Fuse

Match the dead component to its fuse on the diagram, pull it with the puller and replace it only with the same rating. A repeat blow means a deeper fault.

An open fuse box with rows of colour-coded blade fuses, one circled, a magnifier showing its broken link and a fuse puller tool.

Find a blown car fuse by locating the panels, reading the diagram, pulling the fuse and checking the element, with one Kia owner's manual as the example.

Quick answer: Match the dead component to its fuse on the diagram, pull it with the puller and replace it only with the same rating. A repeat blow means a deeper fault.

How do you find a blown car fuse?

Use your owner’s manual to find the fuse panel, match the dead component to its fuse on the diagram, and look for a melted or blackened element. The 2026 Kia K5 owner’s manual says the element inside a blown fuse melts. AAA says a blown fuse has a broken wire inside or looks blackened.

This guide uses the Kia manual as its worked example. Other makes put panels in other places, so your own manual decides. The sources were checked on November 6, 2026. Testing fuses with a meter or test light is not covered, because the sources read here do not describe it.

Where the fuse panels are

The Kia K5 has 2 (or 3) fuse panels. One is in the driver’s-side panel bolster, and the other is in the engine compartment near the battery. AAA says the box is usually under the dashboard or in the engine compartment. The manual’s engine compartment page also labels the fuse box.

Location Where (Kia K5) When Kia says to check it
Driver’s-side panel Panel bolster First, if the electrical system does not work
Engine compartment panel Near the battery If lamps fail but the inner panel fuses are fine; spare fuses are kept here
Main (multi) fuse Inside the positive battery terminal cap If electronics misbehave though panel fuses are intact; dealer check

How to read the fuse diagram

Inside each panel cover is a label showing the fuse or relay name and its capacity. The manual repeats this information in tables. It warns that not every description applies to every vehicle, so trust the label in your car.

Fuse name Rating Circuit protected
DOOR LOCK 20 A Door lock and door unlock relays
TRUNK 10 A Trunk lid relay
S/HEATER (FRT) 25 A Front seat warmer and ventilation seat modules
ABS2 (engine compartment) 40 A Electronic stability program control module

These rows come from the K5 panel description. The ratings are given in amps. The text on these pages does not describe any color coding, so match the amp number, not the color.

Pulling and checking a fuse, step by step

  1. Turn the ENGINE START/STOP button and all other switches off. Kia’s notice also says to switch off electrical devices and remove the negative battery terminal when replacing a fuse. Follow your manual on that point, and see how to clean battery terminals safely.
  2. Open the cover. On the engine panel, press the tab and pull the cover up.
  3. Find the suspect fuse on the label.
  4. Pull it straight out with the puller. Kia places a removal tool on the engine panel cover and a puller in the engine panel.
  5. Look at the element. A melted element, a broken wire or blackening means the fuse is blown. AAA adds that a burnt smell near the box can be a sign.
  6. Push in a new fuse of the same rating until it sits tightly in the clips.

Kia warns against a screwdriver or any metal object to remove fuses, because it may short circuit and damage the system. After closing the engine panel, listen for the click. A loose cover can let water in and cause electrical failure.

What never to do with a blown fuse

Kia says never to replace a fuse with anything but another fuse of the same rating. A higher-capacity fuse could cause damage and possibly a fire. It also forbids a wire or aluminum foil, even as a temporary repair.

Do not remove fuses, relays or terminals fastened with bolts or nuts. If one of those is blown, Kia says to consult a dealer. The same goes for a blown main (multi) fuse.

If the replacement fuse blows, Kia says that points to an electrical problem. Avoid using the system involved and see a dealer. AAA also says a technician should find the root cause. For lights that flicker rather than die, see headlights flicker while driving. More repair guides sit under DIY Car Repair.

Frequently asked questions

Can a blown fuse stop my car from starting?

Yes, according to AAA. A blown fuse can keep vital parts such as the ignition system from working. Signs include an engine that does not turn over while other electrical parts seem fine, or accessories that suddenly stop.

What if I do not have a spare fuse?

Kia says to use a fuse of the same rating from a circuit you may not need to operate the vehicle, such as the power outlet. Spares are kept in the engine compartment panel. Restore the borrowed circuit with a correct fuse as soon as you can.

Why does the new fuse keep blowing?

A fuse that blows again points to an electrical fault, not a bad fuse. Kia says to avoid using the system involved and see a dealer. Do not move up to a bigger fuse to stop it blowing.

Where are the spare fuses?

In the Kia K5, they are in the engine compartment fuse panel. Other vehicles differ. Look in your manual’s fuse section, or on the inside of the panel cover.

How this guide was prepared: Researched explanatory guidance using the sources linked on this page. We have not road-tested a vehicle or completed a hands-on inspection for this article. The displayed byline is a fictional editorial persona, not a real individual author or certified technician reviewer. Motor Atlas is responsible for this content. Confirm vehicle-specific procedures with the manufacturer, and ask an appropriate professional before safety-critical repairs, legal filings or financial decisions.

Related reading