THE MOTOR ATLAS GUIDE

How to Find Your Vehicle's Required Oil Specification

Read the recommended lubricants section for your exact model year and engine, then match the viscosity grade, performance specification and capacity on the container.

An open owner's manual showing a specification table under a magnifier, beside an oil filler cap and a small oil bottle.

Find the exact oil grade, API or manufacturer approval and capacity for your engine using the owner's manual, the filler cap and the container label.

Quick answer: Read the recommended lubricants section for your exact model year and engine, then match the viscosity grade, performance specification and capacity on the container.

Where do you find the required oil specification?

The requirement is in your owner’s manual, usually in a section titled recommended lubricants and capacities, with a viscosity chart for your engine. The manual is the document that lists the full requirement, not just the number on the oil filler cap.

AAA’s motor oil guide makes the same point: the most important information for choosing oil is in the owner’s manual, which specifies the SAE grade, the oil type and any third-party certification.

Use the manual for your exact model year and engine. A different engine in the same model can take a different grade, and so can a different model year.

What to record and where to find it

The requirement is not one number. It is a viscosity grade, a performance specification and a capacity.

Kia’s 2026 K5 manual shows the format. The 2.5-liter GDi engine takes full synthetic SAE 0W-20 that is API SN PLUS/SP or ILSAC GF-6. The drain and refill capacity is 6.1 US quarts.

The turbocharged 2.5-liter in the same car takes SAE 0W-30. The grade and the capacity both belong in your notes before you buy anything.

Item Where to find it 2026 Kia K5 2.5 GDi example
Viscosity grade Recommended lubricants section; viscosity chart SAE 0W-20
Performance specification Same manual row; container label API SN PLUS/SP or ILSAC GF-6
Capacity Drain and refill row 6.1 US qt
Oil type Manual wording Full synthetic
Manufacturer approval Manual, or the maker’s oil specification site GM dexos on models that call for it

Read the viscosity chart for your climate

Kia’s viscosity section includes a temperature range chart and tells the owner to consider the temperatures the car will see before the next oil change. It says viscosity affects fuel economy and cold-weather starting, and warns that a non-recommended grade can damage the engine.

That is why a single “best oil” recommendation for every car does not exist. The chart is specific to the engine, and the range matters if the car sees very cold or very hot conditions.

Look for the API Certification Mark

API’s Engine Oil Licensing and Certification System authorizes oil marketers to use the API marks when their products meet the program’s requirements. The program is described in API 1509, and SAE J300 defines the viscosity grades.

Kia’s manual says it recommends only engine oils that uphold the API Certification Mark. AAA likewise advises looking for the mark unless there is a specific reason to buy an uncertified oil.

The mark is not a substitute for the manual. It shows an oil is licensed to a service category; it does not tell you which grade your engine needs.

Check for a manufacturer-specific approval

Some automakers add their own specification on top of the industry category. General Motors’ dexos program is one example: GM’s dexos site describes oils formulated for GM engines to its own specification.

The Kia example relies on the API and ILSAC categories instead. The pattern is what matters: read the manual for the exact wording, then match that wording on the container.

An oil can carry the right viscosity and still lack the approval. Both lines have to match before the product is the correct one.

Confirm the model year, engine and market

Manuals are written for a model year and an engine family. A 2026 Kia K5 with the 2.5-liter GDi is not the same requirement as the turbocharged 2.5-liter, even though the body and model year are identical.

If the manual is missing, the manufacturer’s owner site is the next place to look. The FTC’s consumer alert also points owners to the manufacturer’s website for a replacement manual.

Do not treat a single online oil lookup as the final answer. Use it to cross-check the manual’s wording for your engine, then confirm the label on the container.

Keep a record for the warranty

The FTC says routine maintenance, including oil changes, can be done by any shop or by the owner. A dealer cannot deny warranty coverage simply because someone else did the work.

16 CFR 700.10 bars warranty terms that require only an authorized dealer or only a named brand for service the warranty does not pay for. A warrantor may still exclude damage caused by an article that does not meet the requirement.

Keeping the specification on the receipt makes that easier to sort out. Record the viscosity, the approval printed on the container, the quantity and the filter part number.

Choosing a brand is your decision. Matching the specification is the requirement. The Car Parts and Fluids hub has related fluid and filter guides, and synthetic versus conventional motor oil explains the base-oil differences. For timing, see how often to change engine oil.

Frequently asked questions

Where is the oil specification in the owner’s manual?

Look for the recommended lubricants and capacities section, often in the specifications chapter. The same area usually has a viscosity chart and the drain and refill capacity.

Is the grade on the oil filler cap enough?

The cap may show a grade, but it does not list the performance specification or the capacity. Use the manual for the complete requirement and treat the cap as a confirmation.

What if the manual lists more than one grade?

Some manuals give a chart based on temperature. Follow the chart for the conditions the car will operate in, and use the grade the manual recommends for that range.

Can I use any brand that meets the specification?

Yes. Federal warranty rules bar a manufacturer from requiring a specific brand for maintenance you pay for. The oil still has to meet the grade and specification the manual lists.

How this guide was prepared: Researched explanatory guidance using the sources linked on this page. We have not road-tested a vehicle or completed a hands-on inspection for this article. The displayed byline is a fictional editorial persona, not a real individual author or certified technician reviewer. Motor Atlas is responsible for this content. Confirm vehicle-specific procedures with the manufacturer, and ask an appropriate professional before safety-critical repairs, legal filings or financial decisions.

Related reading