Learn what API SP, Resource Conserving, ILSAC GF-6A and GF-6B mean on an oil bottle, how the marks differ and why the owner's manual comes first.
Two organizations, two marks, one bottle
API and ILSAC run separate gasoline-engine oil programs. API issues service categories such as SP and licenses the API Donut; ILSAC sets standards such as GF-6A and GF-6B, which API licenses through the Starburst or Shield mark.
A bottle can carry both, and that is normal. The marks answer different questions. API’s oil-category chart lists the current categories, and its latest oil categories page explains how the marks are assigned.
Your owner’s manual is still the first filter. API says vehicle owners should refer to their manuals before consulting its charts.
What API SP means
API’s gasoline categories use two letters. API lists the S categories under gasoline engines and the C categories under diesel engines. The second letter marks progress through the sequence.
The latest gasoline category includes the performance of earlier ones. API states that an engine calling for API SN is protected by API SP. That is the main reason a newer S category can be used where an older one is listed.
API says the letters SI, SK and SO were skipped to avoid confusion with other organizations.
SP arrived in May 2020. API lists its coverage as protection against low-speed pre-ignition (LSPI), timing-chain wear, high-temperature piston and turbocharger deposits, and sludge and varnish. LSPI protection is one of the specific goals API names for the category.
“Resource Conserving” is not a separate category. API says API SP with Resource Conserving combines SP performance with improved fuel economy, emission-control protection and protection for engines running ethanol blends up to E85.
What ILSAC GF-6A and GF-6B add
ILSAC standards are the automaker-side performance specifications. API’s chart lists GF-6A and GF-6B as current, both introduced in May 2020.
GF-6A covers the common gasoline grades and is the basis for the API Certification Mark Starburst. GF-6B applies only to oils with an SAE viscosity grade of 0W-16 and is the basis for the Shield mark. The two marks are not interchangeable, and GF-6B is not a general-purpose upgrade.
API states the relationship directly: API SP with Resource Conserving matches ILSAC GF-6A.
API’s category page, checked on November 9, 2026, lists SP, GF-6A and GF-6B as current. Do not assume a newer name exists because a parts counter mentions one. Check the mark and API’s chart.
Read the manual line before the front label
The 2026 Kia K5 manual gives a concrete example. For the 2.5 GDi engine it lists full synthetic SAE 0W-20, API SN PLUS/SP or ILSAC GF-6. For the 2.5 T-GDi it lists full synthetic SAE 0W-30 with the same performance choices.
That one line contains three requirements: a viscosity grade (0W-20 or 0W-30), a performance standard (API SN PLUS/SP or ILSAC GF-6), and a base-oil description (full synthetic).
The word “or” matters. A manufacturer may accept either a licensed API category or an ILSAC standard, and may name an older category such as SN PLUS alongside the newer SP. An oil meeting SP satisfies a call for SN PLUS because the newer gasoline category includes the older one.
Viscosity is separate. SAE J300 defines the 0W-20 and 5W-30 grades, while API 1509 and the API marks cover the performance category. A bottle can carry the right API category and the wrong viscosity.
A label-reading table
| What you see | Where it appears | What it tells you |
|---|---|---|
| API SP | upper part of the API Donut | licensed to the current gasoline service category |
| Resource Conserving | lower part of the Donut | meets SP plus fuel-economy, emission and E85 requirements |
| Starburst | separate certification mark | licensed to ILSAC GF-6A |
| Shield | separate certification mark | licensed to ILSAC GF-6B, 0W-16 only |
| API CK-4 | upper part of the Donut | a diesel category; follow the diesel engine maker’s guidance |
The Donut also carries the viscosity grade in its center. Read all three parts: category, viscosity and any ILSAC mark.
For diesel oils, API warns that the latest C category usually, but not always, includes earlier ones. It also says FA-4 is not backward compatible with CK-4 and older categories. Do not carry the gasoline “newer is always fine” rule over to a diesel.
Where the ratings stop and the manual takes over
A mark shows that a product is licensed to a performance standard. It does not prove the oil is the right viscosity, that it meets a manufacturer-specific approval, or that it suits a particular engine’s deposits, seals and turbocharger demands.
API’s licensing program is voluntary, though licensed marketers must meet program requirements and API audits products bought in the market. The mark is a useful check, not a guarantee against counterfeits.
The practical rule is short: match the manual’s viscosity and performance line, then choose a product with the corresponding API or ILSAC mark. If the manual lists a manufacturer approval beyond API or ILSAC, that approval also has to be met. For the base-oil side, read synthetic vs conventional motor oil, and for drain intervals see how often engine oil should be changed.
Browse more oil and fluid guidance under Car Parts and Fluids.
Frequently asked questions
Is API SP always better than API SN?
For a gasoline engine that calls for SN, API says SP provides full protection because the latest category includes earlier ones. For an engine with a specific manufacturer approval, follow that approval.
Can I use an ILSAC GF-6B oil in any car?
No. API says GF-6B applies only to 0W-16 oils. It is not a general replacement for GF-6A. Use the viscosity and standard your manual lists.
Does the API Donut show the oil’s quality?
It shows the service category and viscosity the marketer claims, and API licenses use of the mark. It does not replace the owner’s manual or a manufacturer-specific approval.
What if my manual lists both API and ILSAC?
Either route can satisfy the line if the oil carries the matching mark. The 2026 Kia K5 lists “API SN PLUS/SP or ILSAC GF-6,” so an oil meeting either standard works if the viscosity also matches.
